At Burnside Sheet Metal Ltd, we’re equipped to make numerous types of custom residential and commercial products made of metal. Those include:
We primarily work with the following types of sheet metal:
To answer all of your metalsmith needs, we conduct various restaurant related and welding work (in shop and on-site).
We’re also equipped to manufacture (from templates) vehicle body/rocker panels and sell 4 feet by 8 feet metal sheets (larger sheets can be ordered in advance).
Light sheet metal, 26-gauage (thin) to 16 gauge (thickest), is available in sheets of 4 feet by 8 feet.
Materials available:
Miscellaneous Metals Available
Note: These items are not stock items, but we can have them in stock for you within one to two days.
Screen
Tabletops
Tabletops can be bent for garage, kitchen, workshops; available in steel, galvanized, or
stainless steel (up to 4 feet by 8 feet in size). These include any backsplashes and/or overhands required. Any larger sizes must be welded and polished.
Drain Pans
Used for under any water-containing item (washers, hot water tanks, air conditioner units, etc.), with or without drain hole.
Shields/Backsplashes
Door kick plates, corner guards, and heat shields are available with or without mounting holes.
Bending/Cutting
We are able to bend up to 8 feet long and cut up to 10 feet long. We work with steel, galvanized steel, and stainless steels up to 1/16” (no thicker). We cut and bend aluminum sheets up to .09” thick (slightly less than 1/8”).
Some examples of items we bend in our shop are:
Flashing
Rocker Panels
Panels are bent straight NOT rolled up to 8-feet long. We require that you provide us with template made from the shape of your rockers (using a strip of metal hand-bent to the profile on the side of your car or truck).
Welding
If you can bring it into our shop, we can most likely weld it! Sorry, we are unable to weld on vehicles.
Examples of some items we have welded repaired are:
HVAC
Chimney Caps